Steven D. Walker                               CAD Drafter/Designer                              Page 1of 3

3307 Claudia Dr. Concord, CA. 94519

Phone: (925) 363-4858  E-mail: swalker_cadd@yahoo.com

 

11/11–04/16 Novartis Pharmaceuticals, (for JJ professional services), 5300 Chiron Way. Emeryville, Ca 94608

Title: Document control specialist (facility drafting & engineering)

Responsibilities:

•          Interfacing with engineers and Project leaders to create, and update, multi-discipline facility drawings for the Novartis campus of buildings.

•          Drawings including: architectural plans, electrical plans, schematics, single line diagrams and panel schedules,  HVAC, process piping & plumbing, lighting plans, and P&IDs.

Using ECMS software to create, track & manage facility drawings for both GMP & non-GMP documents.

 

01/11-11-11 SDG (Strauss Design Group),  3361 Walnut blvd. suite 120, Brentwood, Ca 94513

Title: Telecom Project Manager (for description see previous employment from 06/08 - 11/09 below)

 

02/10 – 02/11 Novartis Pharmaceuticals, (for the fountain group), 4560 Horton Street. Emeryville, Ca 94608

Title: Document control specialist (facility drafting & engineering)

Responsibilities:

•          Interfacing with engineers and drafters to create, and update, multi-discipline facility drawings for the Novartis campus of buildings.

•          Drawings including: electrical plans, schematics, single line diagrams and panel schedules, architectural, HVAC, piping plans  lighting, and P&IDs.

Using ECMS software to create, track & manage facility drawings for both GMP & non-GMP documents.

 

06/08 -11/09 SDG (Strauss Design Group),  3361 Walnut blvd. suite 120, Brentwood, Ca 94513

Title: Telecom Project Manager

Responsibilities:

•          Overseeing and instructing all members of the telecom CAD team.

•          Interfacing with site-acquisition and construction teams and, tracking of drawing sets.

•          Creating zoning & construction drawings for telecom carriers such as T-Mobile and Clearwire.

•          Drafting & design quality assurance (QA), as lead drafting checker.

•          Creating and maintaining the CADD procedures, templates, libraries.

•          Designing cell site equipment layouts including:

BTS cabinets, PWR-TELCO racks, fence & foundations, electrical grounding & single line diagrams,    

conduit plans, cable tray & ice bridges, towers & monopoles, RF stealth screening, RF antennas &  

various hardware mounting configurations.

 

01/07–04/08   Baran Telecommunications Inc.  4271 Park Road Benicia, Ca  94510

Duties as project leader: Creating and maintaining the CADD procedures, templates, libraries.

Drafting & design quality assurance (QA), as lead drafting checker.

Creating zoning & construction drawings for Metro PCS and T-Mobile.

Designing cell site equipment layouts including:

BTS cabinets, PWR-TELCO racks, fence & foundations,  electrical grounding & single line diagrams,    

conduit plans, cable tray & ice bridges, towers & monopoles, RF stealth screening, RF antennas &  

various hardware mounting configurations.

 

01/05–12/06       T-Mobile Inc. Gateway blvd, Concord, Ca

Duties: Creating and maintaining the CADD procedures, templates, libraries.

Drafting & design quality assurance (QA), as lead drafting checker.

Creating Zoning & Construction Drawings.

Designing Cell site equipment layouts including: BTS cabinets, PWR-TELCO racks, fence &   

foundations,  electrical grounding & single line diagrams, conduit plans, cable tray & ice bridges,

towers & monopoles, RF stealth screening, RF antennas &   various mounting hardware configurations

 

04/04–01/05     Lawrence Livermore National Laboratory (For Johnson Controls)

Duties: Using CAD to create drawings and 3D models to update and document fabrications,

assemblies, cables, wiring harnesses, interconnect and wiring diagrams for the NIF (National

Ignition Facility), program. Duties also included GD&T and using data bases such as ECMS

(Engineering Change Management), and researching vendor data for cables, connectors, and

various electrical components.

 

06/03 – 04/04    Varian Medical Systems, Palo Alto Ca.  911 Hansen way.

Duties: Using and Pro-Engineer and Autocad to create 3D models and drawings for high and low

energy X-ray machines used in cancer treatment. Duties also include GD&T, fit tolerances,

and using various database support software packages including, PTC Interlink 3.2 and SAP  

database applications to manage documents for the document control group.

 

06/02 – 11/02    Teradyne Inc. Walnut Creek, Ca. 2625 Shadelands Drive.

Independent contractor/consultant using Pro-Engineer and Autocad to create 3D models and                                                

drawings for the Teradyne 7300 AOI Z-axis camera head and the 7300EP conveyor assembly.

 

11/96 - 03/02     Teradyne Inc. Walnut Creek, Ca. 2625 Shadelands Drive.

For Judy Snider - (manager)  Job title: Senior CADD Drafter/ Mechanical Designer.

Duties: Utilizing PRO-Engineer, Autocad and Autodesk Inventor to create 3D models and

drawings, including; mechanical assemblies, wiring and interconnect diagrams, cable-harness 

assemblies, silk-screen artwork, and printed circuit assemblies for; in-circuit, optical, and post

placement electronic test equipment such as; the Teradyne 1800 series, Spectrum, Javelin flying-

prober, and 7300 series AOI automated optical inspection test equipment.

 

08/96 - 11/96     Autodesk Inc. San Rafael, Ca.

For Abijit Oak (project manager).  Job title: Q.A. tester.

Duties: Responsible for testing features in Autocad using automated and manual testing

procedures and finding errors in the new code written by the Autodesk developers.

 

01/96 - 08/96       ARINC Research Inc. (Aeronautical radio inc.), Alameda, Ca.

For Tom Burnriter (project manager). Job title: Senior CADD drafter.                                              

Duties: Responsible for developing maps, plot plans and cataloging of environmental cleanup

needs using GIS, for the Alameda naval air station closure.

 

08/95 - 01/96       DIVA Electronics Inc. Berkeley, Ca.    

For Fastek Services. Bruce Faria (project manager). Job title: Mechanical Designer.

Duties: Responsible for designing and drafting of mechanical enclosures and hardware for

telephone and RF electronic equipment, including; electro-mechanical assemblies and PCAs.

 

10/91 - 08/95       ARINC Research Inc. (Aeronautical radio inc.), Alameda, Ca. 

For Tony Jachyria (project manager) Job title: Senior CADD drafter

Duties: Creation of electro-mechanical assemblies, wiring diagrams, cable assemblies, wiring harness installation diagrams & mechanical equipment rack assemblies for the P3 Orion at the naval air station at Alameda. Valued for very high efficiency with CAD routines. Also valued for excellent knowledge of latest MIL standards.

 

02/91 - 09/91       Jacob Engineering/Architects, Martinez, Ca.           

For JJ Professional Services Inc.  Job title: Senior CADD drafter.  

Duties: Creating of architectural plot plans, H.V.A.C. & plumbing diagrams for the CDC, California Department of Corrections facilities. Valued for high production rate & accuracy.

 

 

 

03/90 - 01/91       Jacob Engineering/Architects,  Martinez, Ca.   

For Comsource Technical Services Inc. Job title: Senior CADD drafter.

Duties: Creating architectural plot plans, electrical and conduit diagrams, as well as security

instrumentation diagrams for the facilities at Lockheed corporation in Sunnyvale Ca.

 

07/89- 03/90         Chevron Engineering Technology Dept.  (ETD) San Ramon Ca. 

For JJ Professional Services Inc. Job title: Senior CADD drafter.

Duties: Piping and Instrumentation diagrams (P&ID's), valve assemblies, pipeways, plot plans, electrical diagrams, mechanical details and assemblies, working with engineers of all disciplines.

 

11/88 - 06/89       Silicon Valley Group (SVG), Milpitas, Ca.                                                                

For Volt Technical Services Inc. Job title: CADD drafter

Duties: Drawings for wafer manufacturing machines, including; electro-mechanical detail, assembly, and wiring diagrams, robotics, exploded isometric assembly drawings, pneumatic diagrams.

 

04/87 - 11/88       Engineering Resources Inc. (ERI), Benicia/Vallejo, Ca.

NAVELX (Naval Electronics Engineering) Mare Island Naval Base, Vallejo, Ca.

Job title: CADD drafter (through Ewing Government Services).

Duties: Completed a package of 496 drawings for NAVELX, (Naval Communications Center), including ECOs, detail, assembly, and wiring diagrams. Utilizing Autocad & Cadvance,

I upgraded existing  documents to military standards, DOD-1000/100 & ANSI Y14.5.

Due to high quality of work, NAVELX engineers requested that ERI allow me to work in their facility at Mare Island where I worked with NAVELX engineers upgrading & designing radar installations, satellite communications equipment for submarines, fallout shelters, and electronic equipment racks for ships and submarines.

 

 

 

Training and Professional Skills

27+ years experience with all versions of Autocad.                                                                                              

6+ years experience with Pro-Engineer.

Experience with Autodesk Inventor and SolidWorks.

 

Excellent knowledge of:

G.D.&T. ANSI Y14.5 (dimensions & tolerances). Global version 10. Military standards (MIL-T-31000),

(DOD-D-100/1000). Auto-LISP routines. Custom Autocad menu writing. Setup & installation of software

and hardware. All disciplines of drafting. 3D modeling, exploded & non-exploded isometric drafting.

Data prep & component library block construction. Writing procedures for proper standard drafting practices.

 

Certificate of Completion at Autodesk training center  03/24/01

AutoCAD 2000I update

P.T.C. Corp. (Parametric Technology)   01/98

Completed a course in Pro-Engineer for 3d modeling.

TQM (Total Quality Management)  96-98

Administrated 7-step QIT to reduce the cost of producing silkscreen artwork resulting in a 50%+ reduction in artwork cost. Participated in 9-step QIT for the development of drafting and documentation standards

The Copper Connection Inc.  06/86 – 06/87

Completed a course of studies in Printed circuit design, electronics and CADD, where I was awarded a diploma and 33 units with a letter grade average of "A" in the following studies:  Digital and analog printed circuit design, computer-aided design and drafting.

Diablo Valley College, Pleasant Hill, Ca.  85' & 86'