Built Mobile Telecom Infrastructure from Cradle to Grave. Consisting of 125 FT Portable Towers,2400 MGH and 5800 MGH Air Grid Antenna. Installation of 915 Radio and all their peripherals. Installation of Bearcomm mobiles radio system as well as Synguards Antenna.  Also,test and turn-up all wireless system using Ubituity software. All equipment was vital in Tracking troops movements and coordinates, as well as kill ratio.All data and statics would be feed to monitors and images are assigned to appear like Video  War Games. 04/2014- 06/2014 Took down time for family and regroup for start of  XTCT Project with US Army National Guards.

INFINERA / CORTECH11/2013-03/2014

Tester And Turn-Up, LV-IV Installer

Turn key Operation, Installing, Testing, Running Fibers and Cables to include DC Power for INFINERA XTC-4, XTC-10 and DTN-X, ARRIS E-6000 and D4.

SPRINT / VERIGENT                                                                           03/13-09/13

Certified Roof Tower Top Tester

Drive to work site. Setup test equipment, Tested all sectors (Alpha, Beta, Gamma) with LTE and CDMA Tester, prior to migration.

TELAMON / VERIGENT

COEI LV-IV08/12-03/13

Install, repair, splice, test, and terminate various forms of telecommunication and electrical systems as well as wiring and cabling. (e.g. copper, fiber, coax, etc.) to ensure proper impedance matching and connections between various pieces of electronic equipment.

GD MUX TELECOM, Inc                                                05/2010-08/2012

 Installer/ Fiber Optic System Tester                                                               

Installation, test and turn-up of Ciena 4200 RS Network Nodes. Documents job-related activity (e.g. service orders showing work performed, location of equipment, time and parts used for repairs and/or modifications, weekly time sheets, travel claims, etc.). Currently some of our clients are: New York Stock Exchange and NBC.

 Quality Assurance Manager

Various DOD Installations                                                                                            1/ 2008 – 5/2010

Most recent, Installation PA System for CENTCOM, located at MacDill AFB, FL.

Installed Public Address System in six buildings to include installation of head-end, locate in main building secure office, nine zones total. All work complete on or ahead of schedule.

 Cable Technician

Hyperion                                                                                                                         4/2007 - 6/2007
Hyperion is a DOD Contractor.  Hyperion was rewarded the contract to install new check-out lanes in all DOD Commissaries. I was a sub-contractor for Hyperion, for this reason. My scope of work entailed the installation of all new cat-6 cabling, from the check-out lanes to network equipment located in the POS office. There were some new installation of equipment that had to be place in their existing racks and old equipment that had to be removed (routers, server, multiplexers, patch panels). All this work was done doing a maintenance window. All cut-over were successfully completed with minimum down time. The cat-6 cabling had to be terminated at both ends with RJ-45 connectors. The time away from home was having a negative impact on the home front. I returned home to seek local employment

 

Lead Splicer

DA Communications                                                                                                        12/2006 - 3/2007
Trained two team members on FTTH for Connexion, Training consisted of terminating 144 fiber Head-ends, out to the FDH as well, from the FDH to the subscribers.
Splicing was done using a Fujikora as well as Corning F/X fusion splicers. All testing was completed using OTDR and Multi-meter Tester. All areas of my responsibility were complete and free of any troubles. All work took place in Jacksonville, Fl and Savannah, Ga.
 

OSP Field Engineer 7/2006-12/2006

Fort Steward                                                                                                                 
Designed manhole fiber route at Fort Steward. This was to install fiber ring on Fort Steward. Created detail prints for the installation of the fiber ring. Created as-built drawing after installation.

Network Tech

Switch and Data / Equinix                                                                                              3/2003 - 7/2006
Quality Audit and help design CLEC at 60 Hudson Street , suite 1602 New York City, New York. All building and installation of equipment and Iron work was done in accordance with TP76300 and TP76400. This project was vital in making Switch and Data one of the largest Telecommunication Interconnectivity and Peering Company in New York. This lead to Switch and Data receiving the contract to house, two hundred thousand square feet of space to Pac West of Sacramento, California.
 

Field Engineer

Contractor for MCS of Tampa                                                                                   6/2002 - 3/2003
Work performed: Detailed manhole drawing of existing underground plant. This was part of the pre-installation survey, to support the NMCI project at Pensacola Naval Base, Fl. Work involved, recording the dimension of the manholes, identify and label all cables and splice closures; ensure all splice closure were grounded as well as bound. Recorded sizes of all conduits, their routes and inspected closures for leaks as well as proper tape wraps. Made sure all transition splices from lead to pic were done according to Bell Specs. Up-dated all manhole drawings and numbered each manhole.

Also perform emergency Fiber and CATV cable restoration Time Warner; after a major ice storm in North Carolina. Replaced drops to DID and repaired over 20 miles of fiber optic cables. Restored telephone and TV service to over two hundred customers

Central Office Installer

Fujitsu Network Service                                                                                                12/1998 - 5/2001
Lead and trained three installation crews on installing Fujitsu FLM-150, FLM-600 and FLM-2400 Fiber Optic Network Rings (SONET). This equipment is similar to Nortel's OC-3, OC-12, OC-48 and OC-192. We sold our services to Bell South, Bell Atlantic, Verizon and Adelphia as well as others, including the international markets. Prior to the reduction in force, my team was responsible for installing the ADOX Light-guide Wave System from Miami to Chicago, also from Ontario, Ca. to Las Vegas, NV performing partial turn up of the system which involved, slotting of cards, bar coding for the customer and FNC. The objective 6/1993 - 6/1996 was to install a ring throughout the U.S for Dynergy via Level 3 site locations. All legs of the ring that I was involved with, were done on or before the due date, for a profit. After work was completed sites were revisited to perform quality audit on all installation which included Panduit Fiber Tray, Iron Work for Ladder Racks and Top Support, Power Cable Installation, Lacing of Cable and Grounding: Isolated and Integrated Ground of Racks and Bays to include Star washers to rack Ground from Equipment Shelves. Quality Audit was done in Accordance with TP76300 and TP76400.    

Multiple Service Group                                                                                                  1/1998 - 12/1998
Perform section-throws on bad or damaged cables, isolated cable faults and splicer errors. Re-engineered previously engineered projects to ensure proper installation of as-built drawing. Maintained air pressures on paper and pulp cable, expanded service to subscriber locations, and relocated cross-boxes for road expansions.

Harris-McBurney                                                                                                    6/1996 - 1/1998
Performed total installation of cable plant, executed expansion and cut-over of existing cable plants, cut-over T-1s, HDSL, ADSL, and ISDN circuits, troubleshoot and repaired subscribers line problems.

Outside Plant Supervisor / Technician

Lockheed Martin                                                                                                          
Maintain cable plant, train subordinates in placing, splicing, terminating, pressurization, and testing of fiber and copper core communication cable; also the operation of heavy equipment (high boy, low-pro, ditch witch trenchers, backhoes, cable reel truck and trailers and fork lift (AT/10K). This includes the expansion of cable pairs in buildings, section-throws, terminating incomplete installations, re-routing cable plant for new construction, relocating terminals and cross-boxes without neither disturbing nor interrupting existing services. Up-dating manhole prints and cable routes, installing buried distribution pedestals and monthly inspections of cable air dryers. Assisting Frankfurt International Airport Engineers with turning over large grids of Rhein-Main AB back to the German Government.
 

United States Air Force                                                                                                9/1982 - 3/1993
Team Chief Responsibilities:
Assured team member where properly housed for duration of job
Confirmed all project material was accounted, to complete job
Identified all major material, missing prior to job start/ submitted paper work (ECRA, etc.)
Assured all allied support was in order before work commencement
Assured team had dry and secure area for work location/ project material
Brief senior executive on daily work progress
Maintained training for subordinates

Lead Splicer responsibilities:
Configuration of cable prior to splicing
Functional inspections of completed installations (QAE)
Handling of all cut-overs, from existing plant to new installations
Ensuring all tools and test equipment is properly tracked and serviceable
Maintained all training and personnel files are current and up to date
Configuration of manholes and hand-holes for installation/ removal of cable and inner-duct to include proper disposal

Team Member responsibilities:
Splicing fiber and copper core cable
Installation of splice closure i.e., Better Buried, Perform, Lead, and KB Vault
Splice cables utilizing 710, MS Square, MS6 and fusion splicers.
Termination of copper core and fiber optical cables.

Majority of telecommunications education has come by way of self-study, manufacturer’s training & certification courses, employer in-house study, and “on-the-job” training.

Additional Training & Test Equipment

·   Infinera Test and Turn-Up

·   Alcatel – Lucent RTTT

•                                                                                                         Engineering Installation Project Engineering
•                                                                                                         Certified Air Force Engineering and Installation Team Chief
•                                                                                                         Certificate, Air Force NCO Academy
•                                                                                                         Certificate, Air Force Antenna Systems Installation and Maintenance
•                                                                                                         Certificate, Air Force Fiber Optic Cable Installation and Maintenance
•                                                                                                         Certificate, Installation Practices Training Outside Plant/LAN/CAT-5e/CAT-6
•                                                                                                         Community College Air Force (two years)

WILL TRAVEL 100%

Employers Point of Contact and Address

VERIGENT

ROCKVILLE, MARYLAND

MIKE SCHIANO

704-658-3279

MSCHIANO@VERIGENT.COM

SRI

FREEMONT, CA.

SCOTT PARKS

254-702-7168

SCOTT.PARKS@SRI.COM

ARRIS GROUP

KANSAS CITY, MO

MICHAEL  CHRISTMAS

816-214-0383

MICHAELCHRISTMAS@ARRISI.COM

VERIZON

TAMPA, FLORIDA

OSCAR JOHNSON

LINKED IN

OJAY56@HOTMAIL.COM

ALTA –AFL GLOBAL

BOSTON, MASS

DAN DANYLCHUK

518-944-0361

Daniel.Danylchuk@aflglobal,com