SOFTWARE:      MicroStation J, V8 XM & V8i, Geopak, Inroads, ProjectWise Explorer,

                AutoCAD 2000 and GIS ArcMap.

 

EXPERIENCE:

03/11 to     FERROVIAL / WEBBER CORPORATION     Fort Worth, TX

Present     SENIOR CIVIL CADD Technician

 

·              Used Microstation V8i and Geopak to create and revise plan and profile drawings such as traffic control plan proposed detour pavement and lanes closure, structure abutments & bents and drilled shafts, proposed and existing utilities, drainage and retaining walls. Project working on is NTE (North Tarrant Express) IH820/SH183 in Tarrant County.

·              Perform math calculation necessary to completed job tasks and check final drawings on computer to verify completeness, clarity and accuracy.

 

06/10 to     KIEWIT CORPORATION     Dallas, TX

03/11        CIVIL CADD Technician

 

·              Used Microstation V8 XM and Inroads to produce construction drawings

consists of 3-D horizontal & vertical alignments, csv, dxf and xml for staking. Calculated grade for bridge abutments, retaining walls, water and sewer.

·              Interfaced with project coordinator regarding standards and issues. Project

worked on is DFW Connector in Tarrant & Dallas Counties.

 

12/09 to     LINA T. RAMEY & ASSOCIATES, INC. (LTRA)     Dallas, TX

05/10     CIVIL CADD Technician

 

·              Ten plus years Microstation and three plus years Geopak experience.

Create and modify preliminary & final design construction plans for

TxDOT (Texas Department of Transportation) project.

·              Drawings consists of roadway, water and sewer plan & profile. Project

worked on is DFW Connector in Tarrant & Dallas Counties.

 

08/06 to     PATE ENGINEERS          Dallas, TX

09/09     CIVIL CADD Technician

 

·              Create and modify preliminary & final design construction plans for

TxDOT (Texas Department of Transportation) project. Drawings

      consists of topographic, right of way, alignment, typical sections,

roadway, driveways, cross streets, traffic control plan, drainage

and demolition. Projects worked on are SH 289 in Grayson County,

      FM 740 & FM 741 in Kaufman County and US 271 in Titus County.

 

 

             

11/05 to     DALLAS AREA RAPID TRANSIT (DART)          Dallas, TX

08/06     CADD Technician

 

·              Review rough sketches, drawings, specifications, and other engineering                                               data received from the project designers.

·              Create and modify Light Rail Transit System CAD drawings consists of   catenary layout, signal schematic, manhole/ductbank, express trough and traction electrification plan . Extensive use of reference files in production drawings using Microstation (J) software.

 

03/04 to                   AMERISS          Richardson, TX

11/05        OSP Drafter

 

·              Developed or updated FTTP OSP engineering marked up detailed drawings from the field per Verizon’s standards in FortWayne, Maryland, Virginia and Texas including aerial, buried and underground fiber optic cable, terminals, conduits and handholes using ICGS/IDDS (Interactive Computer Graphics System/Interactive Design & Drafting System) and  Microstation (J) software.

 

08/03 to 3/04       BLACK & VEATCH CORPORATION          Dallas, TX

(3/04 to 05/05      GIS Mapping Technician

part-time)

·              Attribution and Quality Control Water Facilities Mapping. Features consisted of different sizes of mains, fittings, valves and hydrants using Geographical Information System (GIS) ArcMap databases software.

·              Interfaced with project coordinator regarding standards and issues. Project

      worked on was City of Dallas.

 

01/02 to     AMERICAN MASONRY SUPPLY          Arlington, TX

05/03     Architectural Drafter

 

·              Used AutoCAD 2000 software to created Custom Residential Cast Stone drawings such as window surrounds, entrances, quoins, columns, balcony and fireplaces.

·              Responsible for shop drawings and parts lists that are to be used in production

and construction purposes.

 

04/97 to                NORTEL NETWORKS CORPORATION                Richardson, TX

08/01                    COEMOD Engineering  Drafter           

 

·              Worked for Verizon Account including DMS-10, DMS-100 & DMS-200 Switching.

·              Established and updated the new equipment layout to show Office Configuration Diagram OCD) for the initial and extension offices ( Host & Remote).

 

 

 

08/93 to                MCI TELECOMMUNICATIONS CORPORATION         Richardson, TX

04/97                    MicroStation Drafter

 

·              Supported the Inside Plant Engineering group by operating a 686 PC with DOS using Intergraph Microstation version 5.0 software to create, modify and maintain MCI rackface, fault alarm and floor plan CADD files for frames and equipment according to MCI standard.

·              Assisted with engineers to develop EWO project (Engineering Work Order) consisting graphic texts and elements which is tied into a database (Oracle version 6.0).

·              Developed and updated Outside Plant Engineering drawings consisting different types of aerial and underground fiber optic cables, conduits and handholes.

 

07/92 to                PARSONS BRINCKERHOFF / MORRISON KNUDSEN       Dallas, TX

08/93                    MicroStation Drafter

 

·              Operated a 486 PC with DOS and UNIX platforms using Intergraph Microstation version 4.0 Software to create and maintain structural drawings displaying surface and underground of the shafts and adits of the tunnel, building stairs and reinforcing concrete & rebars.

·              Dealt with civil, electrical, mechanical and survey drawings. Extensive use of reference files in setting up production drawings. Coordinated with structural engineers and other discipline engineerss on special projects. Project worked on was Superconducting Super Collider.

 

01/90 to     TU ELECTRIC              Fort Worth, TX

12/91     Intergraph Drafter

 

·              Used Intergraph VAX 8650 and 250 based system to create and maintain IGDS files displaying overhead & underground electrical facilities information. Daily activities include preparation of electrical conducting and devices, landbases, lotlines, roads and addressed layout for digitized.

 

 

EDUCATION:    Mountain View College      Dallas, TX

      Associate degree in Computer Aided Drafting Design/Electronic Technology

      Drafting Courses: Architectural, Civil, Electronic and Machine Drawings

      Electronic Courses: Direct & Alternate current, Active Device, Switch Circuits

 

 

REFERENCES AVAILABLE UPON REQUEST