15609 SE 1st St, Vancouver, W A 98684
Ph: 907-306-5809
bjuddhawaii2@gmail.com

Brian Judd

I have worked as a Designer/Drafter for forty plus years.

The early part of my career was spent in the western United States. First in Washington State as a drafter with Washington State Department of Highways, then in California drafting subdivision plat maps and commercial parcel maps. I also have drafted plot plans for multi-apartment housing and designing utility packages for said developments.

My experience is also in the civil and structural engineering design, working hand in hand in the construction industry in places like Saudi Arabia, Alaska and Hawaii.

 

I have worked (multi-engineering disciplines) for development of complexes and subdivisions in the private sector. Tasked with civil/structural design in the municipal and facilities engineering, I have also worked as a structural steel/concrete designer in the oil and gas industry, petro-chem industry and pipeline related projects.

 

My broad experience as a cad drafter and civil designer, I have learned and developed complete construction drawing packages and obtained permits. Collected survey information from GIS software and local property plats etc. Many times requiring field investigations to verify documents.

 

Alpine Engineering and Construction (2012-2013)

Lead Designer

 

Prepared plan and profile drawing packages to meet City of Houston requirements and drawing packages to Harris County requirements.

 

S&B Infrastructure Private (2011-2012)

Senior Lead Designer IV

 

As-built drawings for Enterprise Crude Pipeline LLC of the Eagle Ford Shale 24” Crude Pipeline.

 

M&M Tanks Ltd.  (2007-2010)

Cost Estimator /Project Manager

 

3 years have been spent estimating and assisting project managers on civil construction projects and piping design and estimating associated with large storage tanks in Hawaii. 

 

 

 

 

 

S&B Infrastructure Ltd.  (1999-2007)

Project Manager/Senior Lead Designer

 

SPR (Strategic Petroleum Reserve) At four different oil storage sites which constitute the SPR or the governments oil reserve, I managed all the civil components involving for the most part drainage improvements of ageing facilities. I was also involved with up-grading buildings, architectural improvements etc. over the course of five years. I was also the lead designer for improving site security of these four facilities.

INNOVENE (formally SOLVEY, a manufacturer of plastic pellets) A storm runoff drainage ditch with effluent discharge from several facilities and with a serious slope failure problem, I was lead designer for the rectification of said 5000 ft ditch.

TDCJ (Texas Dept of Criminal Justice) Managed multiple small projects, ranging from 100,000 sq. ft. re-roof to high mast lighting improvements for the death row facility.

AIR NATIONAL GUARD: Ellington Air Force Base

Re-roofing Project for two different building: Design of standing metal seam roof and construction management of same.

Water Line Project: As construction manager over saw the installation of a new water system for both potable and fire suppression.

PORT OF HOUSTON: Homeland Security Upgrade

We teamed with SAIC for design and construction management of state of the art camera system installation at four of the ports most visible terminals.

 

 

Fluor Daniel Engineers (1993-1999)

Principal Designer

 

ARCO, Prudhoe Bay – As principal civil/structural designer, designed and drafted modules for municiple injection of well heads. (Checked all shop drawings prior to construction)

MAPCO refinery, Northpole, Alaska designed and drafted alignment drawings for a residuum pipeline. (Created drawings by scanning hand drafted plan sheets to Acad format.)

FAA NEXRAD (Next Generation Radar),Middleton Island and Biorka Island Alaska.

Designed and drafted construction drawing packages for two remote plant power stations requiring site plans, grading plans, mechanical and electrical drawings. This included building modules for generators and electrical switchgear. Design drawings for fuel oil tankage and access platforms. Plan and profile drawings of pipeline from sea going barge to the island power plant facility.

VALERO refinery, Texas City, Texas. Design, draft and check piperack drawings and concrete support structure drawings.

Note: All drafting was done with either Autocad 13 or14.

 

TACI – Tech Assist. Co. Inc.(1992-1993)

Senior Designer

 

Gulf Interstate Engineering – Drafted a large portion of concrete foundation facilities of grass roots oil terminus project in Yeman.

Joy Environmental Technology – Drafted entire structural steel drawing package of a precipitator for Murphy Oil Co. 

Note: Drafting was done using Intergraph Microstation.

 

 

Stone and Webster Engineering Corporation (1990-1992)

Senior Designer

 

Aramco, Saudi Arabia – Responsible for the production of the alignment sheets and structural steel and concrete drawings , with all drawings done on an Intergraph Microstation.

 

S & B Engineers and Constructors (1989-1990)

Senior Designer/Checker

 

ARCO Chemical, Channel View – Responsible for structural design and checking of drawings for construction and/or fabrication for ARCO Chemical project.  Also designed and sketched miscellaneous equipment, access platforms and pump equipment support foundations as required to complete project.

Responsible (meaning draft and check) for providing all pipe support needs in environmental upgrade for Amoco Oil Co., Texas City, Texas- Included in this task was the verification in the

field for unobstructed locations for drilled piers and the utilization of existing pipe rack when possible.  This project required the coordination of multiple pipe runs that extended from one side of the plant to the other, crossing and paralleling many times.

 

 

 

H-R International (1989-1990)

Design/Drafter

 

ARCO Chemical – Responsible for the architectural layout and design of a new control room addition.  This included the civil and structural design drawings being drafted by hand. (This is about the time CAD drafting was coming into vogue

 

 

Alyeska Pipeline Service Co (1985-1989)

Senior Designer

 

On a continuing phase of the relining of a 42-inch diameter ballast water pipeline, drafted the temporary reroute of a 36-inch diameter ballast water pipeline while coordinating other related tasks such as new access roads, additions to firewater lines to loading berths, and rerouting of storm water lines.

 

On the first phase of a large bore pipeline reline project, responsible for developing road systems to access work sites while minimizing excavation and embankment needs encountered while working on a mountainside.

 

Injection Station (Pump Stations 4, 7 an 10) responsible for housing the DRA tanks.  This task required design of a building with access platforms, equipment support pads while coordinating designs of mechanical and electrical.

 

Oil testing laboratory facility, responsible for architectural design layout and coordination of lab furniture (cabinets, fume hoods, etc.) needs, with mechanical and electrical requirements

 

 

Education	Certificate: Engineering Technician – University of Washington Brigham Young University – General Education  - 1 year
References	Hurt - Lead Designer - Morris P. Herbert, Inc. Houston, Texas 713-219-1470 JR Reddish  -  President S&B Infrastructure   Inc      713-845-5401