OBJECTIVE:To work with outstanding company where I can utilize my talent, skill and expertise in the field of Outside Plant. Copper and fiber. (FTTP) Fiber to the Premise, (PDS) Premises Distribution System.

 

 

ADDRESS:410 W. Carson St. Apt. 39

                                                            Carson, Ca. 90745

CELL #:  310-634-8186

 

 

E-MAIL ADDRESS:stjoseph_19@yahoo.com

 

 

 

 

WORK HISTORY:

 

 

Northstar Communications Group

Design Engineer                                                            ( SBC - San Jose, California )                         

 

Pronto Jobs

Do detail design of outside plant fibre and cable distributions to provide DSL services. Work includes placing of Controlled Environment Vault, manholes, poles and conduit. Prepare materials broad-brush gauge. Do detail design drawings through AUTOCAD.

Copper and Fibre Building Industry Consultant (BIC)

Do plan and design the plant in most economical manner with due consideration for construction policies, safety and environmental effect. Coordinate with other entities like PG&E, VTA, and business and property owner to decrease possibility of errors or omissions on the job. Do detail design for placing fibre and copper cable inside the buildings.

 

Assignment Duration:  May 2000 –Nov 2002

 

Northstar Communications Group

Design Engineer                                                       ( SPRINT – Las Vegas, Nevada )                         

 

Do detail design of outside plant fibre and cable distributions to provide services to the customer. Work includes place of manholes, hand holes, poles and conduit. Prepare materials take-off. Do detail design drawings through AUTOCAD.

Copper and Fibre Building Industry Consultant (BIC)

Do plan and design the plant in most economical manner with due consideration for construction policies, safety and environmental effect. Coordinate with other entities like DOT and business and property owner to decrease possibility of errors or omissions on the job. Do detail design for placing fibre and copper cable inside the buildings.

 

Assignment Duration:  Dec. 2002 –Oct. 2004

 

 

 

Northstar Communications Group

Design Engineer                                             ( VERIZON – Palm Spring, California )                         

 

FTTP Project

 

Do detail design of outside plant fibre Feeder from C.O. to HUB.

Do detail of outside plant fibre Distribution from hub to the customer point of entry.

Do field check for house count, addresses. Identify type of units whether residential, business or commercial. Coordinate with HOA management. Define type of service SFU, MDU and MTU.

Define, verify boundary for each hub assigned.

Do field survey of existing facilities service box, hand hole including ducts. Verify pole number, height, attachments and riser duct.

 

Assignment Duration:  Nov. 2004 – April. 2005

 

 

AFL Telecommunications

Design Engineer                                                           ( AT&T-ANAHEIM, California )                         

 

CONDUIT  LAYOUT

 

Do detail survey of existing communication facilities service box, hand hole, manholes. 

Do detail survey of existing underground facilities gas, water, sewer, drain, power, cable tv and other facility needed to do the design.

Verify pole number, height, attachments and riser duct.

Verify the Right of Way, Easement and private property to incorporate in the design.

 

Assignment Duration:  May. 2005 –Aug.2008

 

 

 

 

Wellsco Inc.

Design Engineer                             ( VERIZON - Huntington Beach, California )                         

 

FTTP Project

 

Do detail design of outside plant fibre Feeder from C.O. to HUB.

Do detail of outside plant fibre Distribution from hub to the customer point of entry.

Do field check for house count, addresses. Identify type of units whether residential, business or commercial. Coordinate with HOA management. Define type of service SFU, MDU and MTU.

Define, verify boundary for each hub assigned.

Do field survey of existing facilities service box, hand hole including ducts. Verify pole number, height, attachments and riser duct.

Do materials take off and estimate of the project in RAMS.

Do quality checks for the work perform by other contractors.

Assignment Duration:  Oct. 2008 – Jun.2009

 

 

 

Inland Engineering Serivices Inc.

Design Coordinator                               ( Time Warner Cable - Redondo, California )                         

 

COMMERCIAL & BUSINESSES Project

 

Do design fiber for particular commercial business through underground, buried and aerial.

Do field check for house addresses. Identify type of units whether residential, business or commercial.

Do field survey of existing facilities service box, hand hole including ducts. Verify pole number, height, attachments and riser duct.

Do materials take off and estimate of the project.

Do Y-intercept, traffic control plan.

Assignment Duration:  Sept 2009 – Dec. 2009

 

 

 

 

 

 

 

 

 

 

Byers Engineering Co.

Design Engineer                                                         ( AT&T-ANAHEIM, California )                         

 

CONDUIT   LAYOUT

 

Do detail survey of existing communication facilities service box, hand hole, manholes. 

Do detail survey of existing underground facilities gas, water, sewer, drain, power, cable tv and other facility needed to do the design.

Verify pole number, height, attachments and riser duct.

Verify the Right of Way, Easement and private property to incorporate in the design.

Design traffic control for Caltrans and different cities based on their requirements.

Design conduit path for fiber and copper. Design for clearing conduit blockage including wye-intercept for permitting.

 

Assignment Duration:  December 2009 – May 9, 2011

CHC Consulting LLC

Design Engineer                                                  ( AT&T- LA HAMBRA, California )                         

 

CONDUIT   LAYOUT

 

Do detail survey of existing communication facilities service box, hand hole, manholes. 

Do detail survey of existing underground facilities gas, water, sewer, drain, power, cable tv and other facility needed to do the design.

Verify pole number, height, attachments and riser duct.

Verify the Right of Way, Easement and private property to incorporate in the design.

Design traffic control for Caltrans and different cities based on their requirements.

Design conduit path for fiber and copper. Design for clearing conduit blockage including wye-intercept for permitting.

 

Assignment Duration:  May 25, 2011 To July 25, 2014

 

 

CHC Consulting LLC

Design Engineer                                                  ( AT&T- LA HAMBRA, California )                         

 

CONDUIT   LAYOUT

 

Do detail survey of existing communication facilities service box, hand hole, manholes. 

Do detail survey of existing underground facilities gas, water, sewer, drain, power, cable tv and other facility needed to do the design.

Verify pole number, height, attachments and riser duct.

Verify the Right of Way, Easement and private property to incorporate in the design.

Design traffic control for Caltrans and different cities based on their requirements.

Design conduit path for fiber and copper. Design for clearing conduit blockage including wye-intercept for permitting.

 

Assignment Duration:  May 25, 2011 To July 25, 2014

 

 

AFL Network Services

Design Engineer                                                  ( AT&T- SACRAMENTO, California )                         

 

HICAP & JPA

 

Study and verify work order to do complete working package for DS1 subscriber.  Provide MIC info CFAS info. Do work print for the technician to follow on the field. detail survey of existing Prepare work print for JPAT & JPAR work order. This include the pole information, MiC info, CFAS info. All work are done with Aramis DT.

 

Assignment Duration:  March 16, 2015 to Present

 

 

AFFILIATION:       INSTITUTE OF ELECTRICAL & ELECTRONIC ENGINEERS

 

SKILLS:                            AUTO CAD, ICGS-IDDS, ARAMIS-DT

 

 

REFERRENCE:

 

Aris Munsayac : Tel # 1 323 842 0761

 

Jef Sol: Tel # 1 808 359 4223

 

Vahid Farsani: Tel#  1 714 348 6369