SHAHZAD ZAMAN

Electrical & Instrumentation Inspection Engineer (QA/QC).

Saudi Aramco SAP Approved (70013081).

Cell: 0538759706.  Email: shahzad.zaman@outlook.com. Skype: sakhan66

Summary:

6 Years of experience in Electrical, Instrumentation, Cathodic Protection, Security System and Communication systems Engineering during all phases of Projects i.e. Construction, Expediting Procurement, QA/QC Inspection, Pre-commissioning and Commissioning of Petrochemical and Oil &Gas Refineries, GOSP Plants, Well heads, Pump Stations, Cross country Pipelines and Shipping Construction industry.

Offshore experience in offshore platforms, War Ships, War Submarines construction and maintenance at Pakistan Navy dockyard

 

Educational Qualification:

v                                                                                                                                  Bachelor of Technology (B-Tech).

Electrical/ Electronic Engineering

Indus University, Karachi Pakistan

Passing Year Jan-2010

v                                                                                                                                  3 Years DAE in Electrical/ Electronic Engineering.

PN Poly Technique Institute, Karachi Pakistan

Passing Year 2008

 

 

Work History:

July, 15 – Present (Saudi Arabia).

Position:Sr. QA/QC Inspection Engineer (Electrical & Instrumentation).

Company:TUV Nord Saudi Arabia.

Saudi Aramco Project Inspection Department (PID)

TUV Technical Inspection Department (TID)

 

December, 2011 – July, 15 (Saudi Arabia).

Position:QA/QC Inspection Engineer (Electrical & Instrumentation).

Company:Al Suwaiket Support Services.

Manpower Supplier to leading EPC companies in KSA.

 

1). Project:SADARA Saudi Aramco Dow Chemical JV Project, Jubail.

Client:Tecnicas Reunidas Gulf – TRG (CHEM-III, EOD, POD, EO)

2). Project:SATORP Saudi Aramco Total JV Project, Jubail.

Client:Sumitomo Corporation KSA (PKG-10)

3). Project:Saudi Aramco Manifa Cogen & Main Substations Project, Manifa.

Client:Tecnicas Reunidas Power TRP/ Saudi Aramco.

 

4). Project:Saudi Aramco Manifa Core Hydrocarbon Facilities Project, Manifa.

Client:Snamprogetti Saudi Arabia (Saipem)/ Saudi Aramco.

 

October, 2010 - November, 2011 (Saudi Arabia).

Position:Inspection Engineer QA/QC(Electrical & Instrumentation).

Company:FMQ Faisal Mohammad Qahtani Sons Co.

Cross Country Pipelines and Plant Construction company.

 

1). Project:Saudi Aramco, Karan Project KCIS, Khursaniya.

Client:Saudi Aramco/ J. Ray McDermott

2). Project:Saudi Aramco, OMP Fadhili water injection stations, Fadhili.

     Client:Saudi Aramco.

3). Project:Saudi Aramco, OMP Abqaiq pipelines Project, Shedghum Abqaiq.

Client:Saudi Aramco.

 

January, 2007 - September, 2010 (Part Time) (Pakistan).

Position:Associate Electrical Engineer (Part Time).

Company:PND Pakistan Navy Dockyard/ Shipyard, Karachi Pakistan.

PND Pakistan Navy Dockyard, (ISO-9001 Certified)War ships & submarines Construction/Maintenance Organization, Government of Pakistan.

 

1). Department:PND Submarine Sensors and Control Systems.

2). Department:PND Radar & Radar Detection Systems.

 

 

QA/QC Inspection Work History:

Able to Perform E & I inspections as per Saudi Aramco QMIS and Engineering  Standard/ Codes(NEC, NEMA, UL, IEEE, ANSI, PIP, ASTM, NETA,  NFPA, SAES & SAMSS, BS, BICSI) by the reference of client approved  ITPs Hold/ Witness Points, RFIs, Project site instructions/Technical Queries at all phases of Construction i.e.Vendor/ Shop Inspection, Material receiving  Inspection, Bench Testing and Filed Testing, Equipment’s installation, Witnessing Pre-Commissioning and Commissioning activities leading to SAT (Site Acceptance Test).

Issuing NCR and Surveillance/ Proactive Reports, Equipment Deficiency Reports, Skill assessment of contractor workers, focus assessment reports, review of construction work procedure, walkthrough, Highlighting PUNCH items for construction and commissioning activities.

 

QA/QC Inspection of Communication & Security Systems :

Clear understanding about erection and commissioning activities of Communication and Security systems i.e. Public Addressing &General Alarm system (PA/GA), Structured Cabling System (SCS) UTPs & STPs, Data Network and wireless LAN, Hotline system, IP Telephony, OSP Coper and fiber optic cables, SACS (Security Access and Control System) IDAS (Intruder Detection & Assessment System), Beacons/ Horn systems, Video Conferencing Systems, CCTV Cameras, FOFSS (Fiber Optic Fence Sensing System, MIDS (Microwave Intruder Detection System).

 

 

QA/QC Inspection of Instrumentation Systems:

Clear understanding about project drawings, specification, procedures, codes and standards, hazardous nonhazardous locations and classified electrical installations.

Inspection for material receiving, Installation and pre-commissioning, handover of Explosion Proof and dust proof Junction Boxes, marshaling cabinets, local panels bypass switches for serial link and, instrument power & control cables, Visual / dimensional check and Calibration for field and package instruments will include Pressure, Level, Flow, Temperature and Analytical Transmitters, Transducers, Gauges, Elements, Vibration Instrument, Electronic Indicators, Switches, Control Valves, on/off valves, MOV’s, Pressure Relief Valves (PZVs) and Orifice Plates, Reverse Orifice, Thermocouples & RTDs prior to installation. A reference standard with a higher and known accuracy will be used.

 

Installation of field instruments after bench calibration is complete as per P&ID’s and Hook up drawings, Instrument cable lists and schedules, Instrument Index, Pressure and Electronic hookups, Instrument connection wiring, Instrument Loop Diagrams, Cable routing, electronic instruments and F&G layout drawings, As- Built Drawings, Typical Installation Drawings.

 

QA/QC Inspection of Electrical Systems:

Understanding about project drawings, specification, procedures, codes and standards, hazardous nonhazardous locations and classified Electrical installations

Inspection of PVC/ RGS/ EMT Conduits installation for Instrument/ Power Cables System within industrial buildings or laying above/ below ground through Ladder or PerforatedCable Tray System, Trenches, Duct Banks and Manholes. Pre-Com testing and installation of Power Transformers, Switchgears, MV/LV PDPs, UPS Inverters, MV/LV Induction Motors, VFDs, MV/LV MCCs, Pipe line heat tracing system, MCS/LCS, Power Socket Outlets & Explosion Proof JBs andotherelectrical system and equipment’s in industrial building OSB, PIBs and SS, Area lighting, Equipment Grounding and Plant Grounding System, Cables Bus Ducts, Cathodic Protection of pipelines, vessels and plant metallic structures in corrosive areas, Thermite Welding Inspection for grounding conductor or CP cables.

Familiar with pre-com activities of Electrical equipment/ Systems Single/ Three Phase MV/LV Motors Solo/ Load Run Tests, Winding Continuity Test, Winding PI Test, Power Sockets Polarity/ Phase Sequence Test, LV/MV/HV Transformers Pre-Energization Tests i.e. Winding Continuity Test, Winding Turns Ration Test, Winding PI Test,  Lighting Illumination Level Tests, Cables Insulation Resistance Test, Cables Flame Test, Cables Capacitance Test, Power Cables HV/MV hi-Pot test, Diesel Generators Solo/ Load Run Tests, Electrical Contact Resistance tests, Electrical Connections Bolts Torque Tests, Earth/ Ground Resistance Tests for grounding Systems, Circuit Breaker Trip Tests, Mandrill Tests.

 

QA/QC Inspection of Cathodic Protection Systems :

Inspection for material receiving, Material handling, Material storage and Installation of CP rectifiers and galvanic anodes and CP test stations along direct buried pipelines, metallic vessels and tanks inside refineries and plants. Inspection of thermite weld or brazing connections of CP cable with metallic structure or pipelines and after weld coating with bituminous paintin Saudi Aramco facilities

Inspection of CP system negative voltage by using Cu-CuSo4 reference anode in Saudi Aramco facilities

 

Job responsibilities as Associate EngineerElectrical:

•                                                                                                                                                           Installation of Cable glands, Sealing fitting, Conduits, EMTs, Hazardous type JBs, Copper and SS process tubing
•                                                                                                                                                           Tubing leak testing
•                                                                                                                                                           Inside submarine vacuum testing for all E&I equipment’s Calibration of pressure gauges, relief valves, pressure recorder
•                                                                                                                                                           Pressure transmitters with dead weight tester or pressure Calibrator.
•                                                                                                                                                           Calibration of temperature recorder, gauges, temperature transmitters and pressure transmitters using temperature calibrator, HART/FF communicator and Foundation
•                                                                                                                                                           Fieldbus power supply system Preparation of instrument calibration reports and certificates after Successful completion of the calibration activities.
•                                                                                                                                                           Installation of Fire Alarm & Smoke Detection System in Offshore Floating Docks, Ships and AGOSTA 70/90B Submarines

•                                                                                                                                                           After repair inspection of Logic Safety Panels & Diving safety Panels and electrical power panels.
•                                                                                                                                                           Circuit Calibration/Loop testing of Operation Monitoring system for physical variables in Engine & power generation system of offshore ships and AGOSTA 70/90B Submarines
•                                                                                                                                                           Installation and pre-com inspection of Flow monitoring and control system

·   Installation maintenance and trouble shooting of following Radar detector, Electronic Support/ Counter Measure System.

•                                                                                                                                                           Radar detector Systems DR 3000 S1X, DR 3000 U1B, DR 3000 SLC, DR 3000 ULC.

·   Installation and maintenance and trouble shooting of following Surveillance and Navigational Radar System RADAR KH-1007 and NUCLEUS.

 

IT Skills:

Microsoft windows XP, VISTA, 7 & windows 8.1, Mac IOS, Android &Linux/Ubuntu

Microsoft office Outlook, Word, Excel, Power Point, Visio

 

Trainings/Seminars and Memberships:

November, 2010:  QA/QC Electrical Inspector training seminar at FMQ Training center, Dammam KSA.

December, 2010:  QA/QC Instrumentation Inspector training seminar at FMQ Training center, Dammam KSA.

January, 2007:   DCN France, Submarine Propulsion Control System Trouble shooting and maintenance course.

American Society of Quality ASQ, Membership code: 65211442

QA/QC E&I Inspector, Saudi Aramco SAP approval # 70013081

 

Languages:

English, Arabic, Urdu/Hindi & Punjabi.

 

Personal Information:

Marital Status:Married

DOB:April 12, 1987

Current Location:Saudi Arabia/ Jubail

Nationality:Pakistani

Passport #:BT5206621

Driving License:Saudi Arabia

Email:Shahzad.zaman@outlook.com

Skype:sakhan66

Mobile:+966-538759706(KSA), +92-321-2287081(PAK).