Technical Summary

 

Microsoft Excel, Data Entry Program, Power Point, Microsoft Access, Internet, Emails, Computer Applications skills. Shop Applications – Global shop, Gfast, SAP, FIT

 

Proficiancy in the use of hand tools (Calipers, Micrometers ID/OD, Dial Indicator, Surface plate layout, Gages od/id/pin/thread/feeler/snap, Abor, Protractor, surfometer.)

Maintained calibration records and performed in-house calibration of companies and workers hand tools.

Proficiancy in the use of Optical Comparator (Distance, Radius, Hole location, Diameter, Angle, Off set Distance and Angle etc.)

Worked under ISO 9001 and AS9100. Well versed with GD&T In the Aerospace and Defense and Industrial Fields.

 

Professional Experience

 

Sept. 2011 – Current              All Metals Processing of Orange County                      Stanton, CA  

(Metal Finishing)

QC Inspector

·          Anodize/Paint/Lube

·          Verify order of operations and process per customer requirements and specifications. Verify process conformance to mil spec’s (Visual, Dimensional and functional)

-           Inspect Prospective process for adhesion, thickness, scratch resistance and electrical insulation.

-           Perform dimensional inspection to ensure conformance to print.

-           Consult with customers on technical data and how to better meet their specific requirements.

-           Work with production on course for rework of rejected materials to meet requirements.

 

 

April 2011 – Sept. 2011        Rockwell Collins Electromechanical Systems                   Irvine, CA

Division outsourced                   (Commercial Systems)

QC Inspector

·         Pilot Controls

·         Maintained quality standards by performing AS9102 First Article, OSP and Final Inspections of Components, Sub-Assemblies and Assemblies per Dimensional and Visual Inspection.

-          Made and Filed AS9102 First Article Inspection Reports (FAIR’s) for internal and customer records. Documenting results, processes and certifications as necessary per requirements.

-          File Corrective Action Reports (CAR’s) for all non-conforming dimensions and work with engineering to find suitable action to be taken with defective part. Work with production to find suitable actions to be taken to prevent further defects.

-          Inspect Completed assemblies (I.E. Latitude and Longitude control / Yaw Brake / Pedal ASSY / Control Wheel and Column ASSY etc.) Via part verification, functional test verification, test of manufacturing techniques and general visual inspection.

-          Address issues with order of operations and worked with engineering and planning to find a suitable and cost effective solution that would be in the best interest of our quality standards.

 

Sept. 2010 – Dec. 2010              M&R Engineering              Anaheim, CA

(Screw and CNC Machined Parts)

QC Inspector

·         Industrial Applications

·         Maintained quality standards by Performing, First Article, in-process, and Final Inspection; recording quality results.

­       Performed First Article Inspection of each order before production could begin. Performed In-process Inspection at each machine through out each day. Inspect between each operation and before and after outsideprocessing, Ensuring the outside process was done correctly per specifications on print.

­       Performed Final Inspection of each order ensuring the entire run stayed true per print, before it could be sent to the customer.

­       Maintained safe and healthy work environment by following standards and procedures; complying with legal regulations by implements of ISO 9001.

­       Updated job knowledge by participating in educational opportunities; reading technical publications and learning new inspection technics from coworkers.

­       Performed all Calibration records of hand tools and gages. Perform In-house calibration of all company hand tools to a calibrated standard.

­       Establishes priorities and organized resources to provide timely, effective solutions to problems while enhancing productivity.

 

Feb 2010 - Aug 2010   Temp              SPS Technologies              Santa ana, CA

(Aerospace Fasteners)

QC Inspector

·         Aerospace Parts

·         Maintained Quality standards by performing In-process and Final inspection of componet and finished assemblies using hand tools and a Optical Comparator. Assembled on production line as needed.

·         Filed for corrective action as needed and worked with production to find a plossible solution.

·         Manage Temporary employees and assign them tasks as necisairy ensure accurate and timely processing of the orders.

 

Jul. 2007 - June 2008              R.B.C. Transport Dynamic corp.              Santa ana, CA

(Aerospace Bearings)

QC Inspector – Legacey Trainee

In this company I was cross trained in most departments and aspects of the company such as production with minor machine operations, shipping and minor factory and machine maintinance.

·         Maintain quality standards by performing In-process and Final Inspection of parts using the aql or 100% depending on customer. Dimensional inspection done using hand tools, comperator and a surface check.

·         Fill out inspection reports for each order and customer. File MRI and MRR for corective actions and work with production to troubleshoot the problems

·         Maintained MRB cage for defective parts.

·         Perform Demonstraitive Inspections for the Boeing Source Inspector.

·         Performed Cross Training in all departments as needed under managerial demands.

·         Establishes priorities and organizes resources to provide timely, effective solutions to problems while enhancing productivity.

 

 

Education, Professional Development & Certification

Ø       Santa ana Community college (blue print/machining/technical math)              2008

Ø       G.E.D.              2008

Ø       Fullerton Comumunity college (Solidworks/GD&T)              2013

Certifications

              2007

­       Certificate of Apreciation – Boeing Aerospace, for exceptional performance during the Demonstraitive Inspection.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Nickolas Nendel

Quality Control Inspector

(714) 496-6499

nicknend@gmail.com